Perle - eX-1SM110-BNC UK
Fast Ethernet IP-Managed Stand-Alone Ethernet Extender - 1 port 10/100Base-TX (RJ-45). BNC ( Coax ) Interlink ( VDSL2 ) connector
Listpris:
12 555,20 kr*
Pris för återförsäljare - Inloggning
Leveranstid: För närvarande cirka 3-4 veckor
Tillverkarens artikelnummer:
06004111
Vårt artikelnummer:
221545
Frågor? Vi hjälper dig gärna! → Kontaktformulär
Produktinformation "Perle - eX-1SM110-BNC UK"
10/100 Ethernet Extenders allow you to extend Ethernet services beyond the general IEEE 802.3 limits of 328ft / 100m using any existing copper wiring previously used in alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV applications. For environments where the 10/100 LAN is being extended and network security is critical, Perle offers Managed Fast Ethernet Extenders that support all authentication, authorization and accounting (AAA) security services used in corporate networks, including TACACS+, RADIUS, LDAP, Kerberos, NIS and RSA. To further protect ID’s and passwords from someone ‘snooping’ on the network, Perle Managed Ethernet Extenders provide secure management sessions by supporting SSH, SNMPv3, Telnet and HTTPS. These types of features are used when managing your corporate firewalls, switches and routers. This is why Perle makes them available in the eX-SM110 Managed Ethernet Extender.
These simple and effective point to point Ethernet Copper Extenders are perfect for commercial buildings, residential units, hospitality environments and remote offices … anywhere you need the ability to securely configure, monitor and manage long range Ethernet communication links between separated LANs or LAN devices (i.e. PCs, digital sensors, VoIP phones, WiFi Access Points, IP cameras and more). For high density applications check out the eX-CM110 Managed Fast Ethernet Extender Modules.
You will also appreciate how easy it is to set up the eX-SM110 with an intuitive Web Manager GUI and multiple methods of access. And, with support for IPv6, Perle Managed Ethernet Extenders provide organizations with investment protection to meet this rapidly growing standard.
10/100 Ethernet Extenders are also available as unmanaged standalone models with support for Commercial Temperature ranges and Extended Temperature ranges.
Scope of delivery: Perle Systems - eX-1SM110-BNC UK
These simple and effective point to point Ethernet Copper Extenders are perfect for commercial buildings, residential units, hospitality environments and remote offices … anywhere you need the ability to securely configure, monitor and manage long range Ethernet communication links between separated LANs or LAN devices (i.e. PCs, digital sensors, VoIP phones, WiFi Access Points, IP cameras and more). For high density applications check out the eX-CM110 Managed Fast Ethernet Extender Modules.
You will also appreciate how easy it is to set up the eX-SM110 with an intuitive Web Manager GUI and multiple methods of access. And, with support for IPv6, Perle Managed Ethernet Extenders provide organizations with investment protection to meet this rapidly growing standard.
10/100 Ethernet Extenders are also available as unmanaged standalone models with support for Commercial Temperature ranges and Extended Temperature ranges.
Scope of delivery: Perle Systems - eX-1SM110-BNC UK
| Connection: | 10 /100, Fast Ethernet |
|---|---|
| Temperature Range: | 0°C to 50°C |
| Management: | managed |
Features
- Extends 10/100Base-TX Ethernet up to 10,000 feet (3 KM) over 2-wire 24 AWG twisted pair
- High-Speed – up to 200+ mbps aggregate bandwidth
- Transparent operation for all Ethernet protocols including 802.1Q VLAN packets and IP video compression schemes.
- Advanced features - Link Pass-Through, Interlink Fault Feedback, Auto-MDIX and Loopback
- Manage via SNMP, CLI - Telnet/SSH, Internet browser, or PerleVIEW Centralized Management Package
Technical details
Management Module Indicators / reset
Power: Blinking green during startup cycle; Steady green: module has power and is ready; Red: error
ALM: Red alarm indicator activated when an alert event occurs
LKC: Green indicator indicating an active Ethernet link. Blinking indicates RX and TX of data
100/1000: Green - 1000 Mbps link; Yellow - 100 Mbps link; Off - 10 Mbps or no Link
Reset button: Recessed pinhole button resets module
Ethernet
Port: 1 port RJ45 – 10/100 Base-TX - Shielded
Auto-MDIX: Auto-MDIX enables proper operation with either straight-through or crossover cabling
Distance: Distance up to 100 meters (328 feet) as per IEEE 802.3
Maximum Frame Size: 1522 bytes
VDSL – Interlink
RJ45, BNC, Terminal Block: Ethernet Extenders must be connected in pairs using unconditioned wire. Circuits that run through signal equalization equipment are not permitted. TIP and RING are polarity insensitive. Surge suppression of 400 volts between TIP and RING. Choice of RJ45, BNC or terminal block models for VDSL link connector:
Indicators
Power / TST: This green LED is turned on when power is applied to the Ethernet Extender. Otherwise it is off. The LED will blink when in Loopback test mode.
CO - Local: Ethernet Extender is operating in CO VDSL mode
CPE - remote: Ethernet Extender is operating in CPE VDSL mode
ILNK: Indicates Link Status and activity on the Interlink (VDSL) port
ETH: Indicates link status and activity on Ethernet port.
Power
Input Supply Voltage: 12 vDC (nominal)
Current: 530 mA @ 12 vDC
Power Consumption: 6.34 watts
Power Connectors: 5.5mm x 9.5mm x 2.1mm barrel socket
AC Adapter: 100-240v AC, regulated DC adapter included
Switches
Rate/Reach: Two switches enable the user to select the right balance between speed and distance for their environment.
Signal to Noise Ratio: Selectable Signal to Noise Ratio (SNR) of 6dB or 9dB. The higher SNR number provides better impulse noise protection but lowers performance.
Auto-Negotiation (802.3u): Enabled (Default) - The Ethernet Extender uses 802.3u Auto-negotiation on the 10/100Base-TX interface. It is set to advertise full duplex. Disabled - The Ethernet Extender sets the port according to the position of the speed and duplex switches.
Link Mode: Standard (Default) – The 10/100Base-TX link remains active independent of the state of the Ethernet link on its remote peer.
Link Pass-Through- the state of the 10/100Base-TX Ethernet connection is “passed through” or propagated across the VDSL link to the 10/100Base-TX Ethernet link on its remote Ethernet Extender peer. This enables a managed switch to report the state of the remote device to its network management system.
Interlink Fault Feedback: Enabled - A loss of VDSL link will drop the 10/100 Ethernet port on each end until the link recovers. Disabled (Default) – The state of the VDSL link is not propagated to the 10/100Base-TX port.
Loopback: Enabled - The VDSL interlink will perform a loopback function, retransmitting all received Ethernet frames back to its peer. Disabled (Default - Up)
Set Ethernet Speed (Port 1): When Auto-Negotiation switch is disabled, fixed speed can be set to 100 (Default) or 10
Set Ethernet Duplex (Port 1): When Auto-Negotiation switch is disabled, Duplex can be set to Full (Default) or Half
Environmental Specifications
Operating Temperature: 0° C to 50° C (32° F to 122° F)
Storage Temperature: minimum range of -25° C to 70° C (-13° F to 158° F)
Operating Humidity: 5% to 90% non-condensing
Storage Humidity: 5% to 95% non-condensing
Operating Altitude: Up to 3,048 meters (10,000 feet)
Heat Output (BTU/HR): 21.63
MTBF (Hours): 221,305 w/o adapter; 156,656 w/ adapter
Packaging
Shipping Weight: 1.2 Kg, 2.6 lbs
Shipping Dimensions: 200 x 300 x 70 mm, 7.9 x 11.8 x 2.8 inches
Management Module Indicators / reset
Power: Blinking green during startup cycle; Steady green: module has power and is ready; Red: error
ALM: Red alarm indicator activated when an alert event occurs
LKC: Green indicator indicating an active Ethernet link. Blinking indicates RX and TX of data
100/1000: Green - 1000 Mbps link; Yellow - 100 Mbps link; Off - 10 Mbps or no Link
Reset button: Recessed pinhole button resets module
Ethernet
Port: 1 port RJ45 – 10/100 Base-TX - Shielded
Auto-MDIX: Auto-MDIX enables proper operation with either straight-through or crossover cabling
Distance: Distance up to 100 meters (328 feet) as per IEEE 802.3
Maximum Frame Size: 1522 bytes
VDSL – Interlink
RJ45, BNC, Terminal Block: Ethernet Extenders must be connected in pairs using unconditioned wire. Circuits that run through signal equalization equipment are not permitted. TIP and RING are polarity insensitive. Surge suppression of 400 volts between TIP and RING. Choice of RJ45, BNC or terminal block models for VDSL link connector:
- RJ45 – RING pin 4, TIP pin 5 (TIA 568 A/B)
- BNC – Coaxial 50 and 75 ohm cable with BNC connector
- Terminal Block – 2 position screw connectors for use with twisted pair telephone, alarm or serial cabling between 19 (0.9 mm) and 26 AWG (0.44 mm)
| High Speed Asymmetric | |||
|---|---|---|---|
| Reach (Distance) | VDSL Rate (Mbps) | ||
| feet | meters | Downstream | Upstream |
| 500 | 152 | 101 | 92 |
| 1000 | 305 | 101 | 63 |
| 1500 | 457 | 90 | 38 |
| 2000 | 610 | 62 | 24 |
| 2500 | 762 | 55 | 10 |
| 3000 | 914 | 42 | 5 |
| 3500 | 1000 | 35 | 3 |
| High Speed Symmetric | |||
|---|---|---|---|
| Reach (Distance) | VDSL Rate (Mbps) | ||
| feet | meters | Downstream | Upstream |
| 500 | 152 | 101 | 101 |
| 1000 | 305 | 85 | 101 |
| 1500 | 457 | 62 | 47 |
| 2000 | 610 | 60 | 29 |
| 2500 | 762 | 44 | 14 |
| 3000 | 914 | 30 | 7 |
| 3500 | 1000 | 29 | 4 |
| Long Reach Symmetric | |||
|---|---|---|---|
| Reach (Distance) | VDSL Rate (Mbps) | ||
| feet | meters | Downstream | Upstream |
| 500 | 152 | 53 | 44 |
| 1000 | 305 | 53 | 43 |
| 2500 | 762 | 39 | 18 |
| 4000 | 1219 | 25 | 4 |
| 5500 | 1676 | 17 | 1.9 |
| 7000 | 2134 | 8 | 2.3 |
| 7500 | 2286 | 7 | 2.2 |
| 8000 | 2438 | 5 | 2.2 |
| Long Reach Asymmetric | |||
|---|---|---|---|
| Reach (Distance) | VDSL Rate (Mbps) | ||
| feet | meters | Downstream | Upstream |
| 500 | 152 | 78 | 16 |
| 1000 | 305 | 78 | 16 |
| 2500 | 762 | 55 | 10 |
| 4000 | 1219 | 31 | 0.8 |
| 5500 | 1676 | 20 | 0.6 |
| 7000 | 2134 | 11 | 0.6 |
| 7500 | 2286 | 10 | 0.6 |
| 8000 | 2438 | 8 | 0.6 |
Indicators
Power / TST: This green LED is turned on when power is applied to the Ethernet Extender. Otherwise it is off. The LED will blink when in Loopback test mode.
CO - Local: Ethernet Extender is operating in CO VDSL mode
CPE - remote: Ethernet Extender is operating in CPE VDSL mode
ILNK: Indicates Link Status and activity on the Interlink (VDSL) port
ETH: Indicates link status and activity on Ethernet port.
Power
Input Supply Voltage: 12 vDC (nominal)
Current: 530 mA @ 12 vDC
Power Consumption: 6.34 watts
Power Connectors: 5.5mm x 9.5mm x 2.1mm barrel socket
AC Adapter: 100-240v AC, regulated DC adapter included
Switches
Rate/Reach: Two switches enable the user to select the right balance between speed and distance for their environment.
Signal to Noise Ratio: Selectable Signal to Noise Ratio (SNR) of 6dB or 9dB. The higher SNR number provides better impulse noise protection but lowers performance.
Auto-Negotiation (802.3u): Enabled (Default) - The Ethernet Extender uses 802.3u Auto-negotiation on the 10/100Base-TX interface. It is set to advertise full duplex. Disabled - The Ethernet Extender sets the port according to the position of the speed and duplex switches.
Link Mode: Standard (Default) – The 10/100Base-TX link remains active independent of the state of the Ethernet link on its remote peer.
Link Pass-Through- the state of the 10/100Base-TX Ethernet connection is “passed through” or propagated across the VDSL link to the 10/100Base-TX Ethernet link on its remote Ethernet Extender peer. This enables a managed switch to report the state of the remote device to its network management system.
Interlink Fault Feedback: Enabled - A loss of VDSL link will drop the 10/100 Ethernet port on each end until the link recovers. Disabled (Default) – The state of the VDSL link is not propagated to the 10/100Base-TX port.
Loopback: Enabled - The VDSL interlink will perform a loopback function, retransmitting all received Ethernet frames back to its peer. Disabled (Default - Up)
Set Ethernet Speed (Port 1): When Auto-Negotiation switch is disabled, fixed speed can be set to 100 (Default) or 10
Set Ethernet Duplex (Port 1): When Auto-Negotiation switch is disabled, Duplex can be set to Full (Default) or Half
Environmental Specifications
Operating Temperature: 0° C to 50° C (32° F to 122° F)
Storage Temperature: minimum range of -25° C to 70° C (-13° F to 158° F)
Operating Humidity: 5% to 90% non-condensing
Storage Humidity: 5% to 95% non-condensing
Operating Altitude: Up to 3,048 meters (10,000 feet)
Heat Output (BTU/HR): 21.63
MTBF (Hours): 221,305 w/o adapter; 156,656 w/ adapter
Packaging
Shipping Weight: 1.2 Kg, 2.6 lbs
Shipping Dimensions: 200 x 300 x 70 mm, 7.9 x 11.8 x 2.8 inches