Perle S-1000MM-S2SC70 UK
Gigabit Ethernet Fiber to Fiber Stand-Alone Media Converter, 1000Base-SX 850nm multimode (SC) [550 m/1804 ft.] to 1000Base-ZX 1550 nm single mode (SC) [70 km/43.5 miles]
Listpris:
33 776,76 kr*
Pris för återförsäljare - Inloggning
Leveranstid: För närvarande cirka 3-4 veckor
Tillverkarens artikelnummer:
05060281
Vårt artikelnummer:
221222
Frågor? Vi hjälper dig gärna! → Kontaktformulär
Produktinformation "Perle S-1000MM-S2SC70 UK"
Perle's feature rich S-1000MM Gigabit Fiber to Fiber Media Converters enable transparent fiber extension of 1000Base-SX multimode fiber to 1000Base-SX multimode or 1000Base-LX/EX/ZX/BX single mode fiber.
Perle's advanced features make the end to end fiber link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. In addition, a lifetime warranty and free worldwide technical support make Perle's S-1000MM Gigabit Fiber to Fiber Media Converters the smart choice for IT professionals.
Whether you need to extend multimode to multimode or multimode to single mode, Perle has an extensive range of S-1000MM Gigabit Fiber to Fiber Media Converters to meet your fiber conversion requirement.
Scope of delivery: Perle Systems - S-1000MM-S2SC70 UK
Perle's advanced features make the end to end fiber link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. In addition, a lifetime warranty and free worldwide technical support make Perle's S-1000MM Gigabit Fiber to Fiber Media Converters the smart choice for IT professionals.
Whether you need to extend multimode to multimode or multimode to single mode, Perle has an extensive range of S-1000MM Gigabit Fiber to Fiber Media Converters to meet your fiber conversion requirement.
Scope of delivery: Perle Systems - S-1000MM-S2SC70 UK
| Connection: | 1000 BaseX, Gigabit |
|---|---|
| Mounting: | DIN-Rail, Panel / Wallmount |
| Option: | Fiber-to-Fiber |
| Temperature Range: | 0°C to 50°C |
Features
- 1000Base-SX to 1000Base-X Fiber to Fiber Media Converters
- Multimode to multimode or multimode to single mode
- Extend multimode fiber to 160km and beyond (through cascading)
- Choice in SC, LC and ST fiber connector models
- Signal regeneration prevents signal degradation
- Advanced Features: Smart Link Pass-Through, Fiber Fault Alert, loopback for each fiber connection
Technical details
Power
Input Supply Voltage: 6 - 30 vDC, unregulated (12 vDC Nominal)
Current: 0.21 amps
Power Consumption: 2.5 watts
Power Connector: 5.5mm x 9.5mm x 2.1mm barrel socket
Power Adapter
Universal AC/DC Adapter: 100-240v AC, regulated DC adapter included
Indicators
Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink slowly when in Loopback test mode.
Fiber link 1 / Receive activity (LK1): This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
Fiber link 2 on / Receive activity (LK2): This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
Switches - accessible through a side opening in the chassis
Auto-Negotiation
Auto (default up) - Fiber Negotiation is performed for both fiber ports. Full and half duplex will be advertised. Pause will advertise support for Symmetrical and Asymmetrical Pause. Pause frame will not be acted upon or generated but will be passed through.
Off - Negotiation on both fiber ports will be disabled. Settings of Link mode and Fiber fault alert will be determined by those switch settings. Pause frames will not be acted upon or generated but will continue to be passed through.
Link Pass Through
Enabled (Default) - When the state of the receiver is changed on one of the 100Base-X interfaces it is reflected on the other 100Base-X fiber transmitter. If disabled, the 100Base-X fiber interfaces operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the other interface.
Far-End Fault (FEF)
Enabled (default) - The media converter transmits the Far-End Fault Indication over the fiber connection whenever a receive failure is detected. The media converter continuously monitors the fiber connection and clears the Far-End Fault Indication condition when a valid signal is received.
Enabled - The 100Base-X receiver is looped to the 100Base-X transmitter. Link #2's fiber transmitter is taken off the interface.
Remote Loopback #1
The media converter can perform a loopback on the link #1 fiber interface.
Disabled (Default - Up)
Enabled - The 1000Base-X receiver is looped to the 1000Base-X transmitter. Link #2's fiber transmitter is taken off the interface
Remote Loopback #2
The media converter can perform a loopback on the link #1 fiber interface.
Disabled (Default - Up)
Enabled - The 1000Base-X receiver is looped to the 1000Base-X transmitter. Link #1's fiber transmitter is taken off the interface.
Fiber Connectors
1000Base-X: Available in SC, ST and LC connector models
Packet Transmission Characteristics
Bit Error Rate (BER): <10 -12
Environmental Specifications
Operating Temperature: 0 °C to 50 °C (32 F to 122 F)
Storage Temperature: minimum range of -25 °C to 70 °C (-13 F to 158 F)
Operating Humidity: 5% to 90% non-condensing
Storage Humidity: 5% to 95% non-condensing
Operating Altitude: Up to 3,048 meters (10,000 feet
Heat Output (BTU/HR): 8.53
MTBF (Hours): Without power adaptor: 432,138; With power adaptor: 274,804
Chassis: Metal with an IP20 ingress protection rating
Mounting
Din Rail Kit: Optional
Wall/Rack Mount Kit: Optional
Product Weight and Dimensions
Weight: 0.3 kg, 0.66 lbs
Dimensions: 120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches
Power
Input Supply Voltage: 6 - 30 vDC, unregulated (12 vDC Nominal)
Current: 0.21 amps
Power Consumption: 2.5 watts
Power Connector: 5.5mm x 9.5mm x 2.1mm barrel socket
Power Adapter
Universal AC/DC Adapter: 100-240v AC, regulated DC adapter included
Indicators
Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink slowly when in Loopback test mode.
Fiber link 1 / Receive activity (LK1): This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
Fiber link 2 on / Receive activity (LK2): This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
Switches - accessible through a side opening in the chassis
Auto-Negotiation
Auto (default up) - Fiber Negotiation is performed for both fiber ports. Full and half duplex will be advertised. Pause will advertise support for Symmetrical and Asymmetrical Pause. Pause frame will not be acted upon or generated but will be passed through.
Off - Negotiation on both fiber ports will be disabled. Settings of Link mode and Fiber fault alert will be determined by those switch settings. Pause frames will not be acted upon or generated but will continue to be passed through.
Link Pass Through
Enabled (Default) - When the state of the receiver is changed on one of the 100Base-X interfaces it is reflected on the other 100Base-X fiber transmitter. If disabled, the 100Base-X fiber interfaces operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the other interface.
Far-End Fault (FEF)
Enabled (default) - The media converter transmits the Far-End Fault Indication over the fiber connection whenever a receive failure is detected. The media converter continuously monitors the fiber connection and clears the Far-End Fault Indication condition when a valid signal is received.
Enabled - The 100Base-X receiver is looped to the 100Base-X transmitter. Link #2's fiber transmitter is taken off the interface.
Remote Loopback #1
The media converter can perform a loopback on the link #1 fiber interface.
Disabled (Default - Up)
Enabled - The 1000Base-X receiver is looped to the 1000Base-X transmitter. Link #2's fiber transmitter is taken off the interface
Remote Loopback #2
The media converter can perform a loopback on the link #1 fiber interface.
Disabled (Default - Up)
Enabled - The 1000Base-X receiver is looped to the 1000Base-X transmitter. Link #1's fiber transmitter is taken off the interface.
Fiber Connectors
1000Base-X: Available in SC, ST and LC connector models
Packet Transmission Characteristics
Bit Error Rate (BER): <10 -12
Environmental Specifications
Operating Temperature: 0 °C to 50 °C (32 F to 122 F)
Storage Temperature: minimum range of -25 °C to 70 °C (-13 F to 158 F)
Operating Humidity: 5% to 90% non-condensing
Storage Humidity: 5% to 95% non-condensing
Operating Altitude: Up to 3,048 meters (10,000 feet
Heat Output (BTU/HR): 8.53
MTBF (Hours): Without power adaptor: 432,138; With power adaptor: 274,804
Chassis: Metal with an IP20 ingress protection rating
Mounting
Din Rail Kit: Optional
Wall/Rack Mount Kit: Optional
Product Weight and Dimensions
Weight: 0.3 kg, 0.66 lbs
Dimensions: 120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches