Perle - IRG5410
Mobile LTE router with integrated LTE-A (CAT6 300M / 50M) - incl. power supply unit and LTE antennas
Listpris:
11 882,60 kr*
Pris för återförsäljare - Inloggning
Leveranstid: För närvarande cirka 3-4 veckor
Tillverkarens artikelnummer:
08000232
Vårt artikelnummer:
221704
Frågor? Vi hjälper dig gärna! → Kontaktformulär
Produktinformation "Perle - IRG5410"
Perle IRG5410 LTE Routers and Gateways have the most comprehensive set of features, functionality, and performance to provide primary or failover back-up connectivity to remote infrastructure and assets. These ultra-low-power, rugged, high-performance Cellular Routers, with dual-SIM slots, are easily deployed with no need for training because of the intuitive web GUI. For advanced admin scrips, CLI commands are also available.
Perle IRG5410 LTE Routers provide fast and reliable network connectivity where wired options are impossible to deploy or require a backup. This is crucial for enabling a wide range of applications while ensuring the highest degree of security to protect the integrity of critical services. Reduce the cost of downtime and service calls, and bringing distributed sites online faster. With support for Data, SMS, Voice, and Video, an IRG5410 and can be integrated into any enterprise cloud, building, industrial, or mobile location network infrastructure.
Scope of delivery: Perle Systems - IRG5410
Perle IRG5410 LTE Routers provide fast and reliable network connectivity where wired options are impossible to deploy or require a backup. This is crucial for enabling a wide range of applications while ensuring the highest degree of security to protect the integrity of critical services. Reduce the cost of downtime and service calls, and bringing distributed sites online faster. With support for Data, SMS, Voice, and Video, an IRG5410 and can be integrated into any enterprise cloud, building, industrial, or mobile location network infrastructure.
Scope of delivery: Perle Systems - IRG5410
| Certifications: | E-Mark, EN 50121, EN 50155 |
|---|---|
| Connection: | Ethernet Port, USB Port |
| Fieldbus options: | EtherNet/IP, ModBus |
| Options: | LTE |
| Power Supply: | 12V DC |
| Wireless Option: | GNSS / GPS / Glonass / Beidou |
Features
- Building and process automation controllers, Internet of Things (IoT)
- Smart grid assets (meters, switches, controllers), Telco infrastructure controllers
- SCADA, Distribution management systems, Remote data loggers, flow meters, sensing equipment
- Digital signage, ATMs, POS, Kiosks, Temporary "pop-up” stores
- Video surveillance, Mobile hotspots
- Fleet management, GPS/GNSS Location tracking, Taxis, vehicle area networking (VAN)
- Transit systems, Buses, Metro Subways, Railways
Technical details
Cellular
Cellular
- LTE: LTE-A CAT6 (300Mbps downlink and 50Mbps uplink speeds)
- Frequency Bands:
4G/LTE-Bands (15): 2100(B1), 1900(B2), 1800(B3), AWS(B4), 850(B5), 2600(B7), 900(B8), 700(B12), 700(B13 ), 800 (B20), 1900 (B25), 850 (B26), 700 (B29), 2300 (B30), TDD B41
3G HSPA/HSPA+ Bands (6): 2100(B1), 1900(B2), 1800(B3), AWS(B4), 850(B5), 900(B8)
Public Safety Band: 26 - Cellular Antenna:
Frequency Range: 704-902-928-960/1427.9-1575.42/1710-2170/2400-2480-2690MHz
Gain: 3 dBi
Impedance: 50 ohm
Voltage Standing Wave Ratio: <3.0 (typical)
Radiation: Omni-Directional
Connector: SMA Male (Swivel)
Dimensions: 135.6 x 20.1 mm / 5.34 x 0.8 in - SIM: Dual Mini-SIM 15 x 25mm (or 2FF)
- GPS/GNSS:
Wide-band GNSS: 1559-1606 MHz
GPS: 1575.42 MHz / GLONASS: 1602 MHz / BeiDou: 1561.098 MHz / Galileo: 1575.42 MHz / QZSS: 1575.42 MHz
Simultaneous tracking: Up to 30 channels
Active GNSS antenna support
Reports: NMEA 0183 V3.0, TAIP - GPS/GNSS Passive Antenna:
GNSS Applications: GPS, Glonass, Galileo, Beidou
Frequency Range: 1561MHz~1606 MHz
Gain: 4 dBi (typical)
Impedance: 50 Ohm
Voltage Standing Wave Ratio: 2.0 (typical)
Polarization: RHCP
SMA (M) straight
Dimensions: 41.9 x 47.3 x 16.3 mm / 1.65 x 1.86 x 0.64 in
RG-174 Cable Lenght: 5 m / 16.4 ft
- Ports: 1 x 10/100/1000 Mbps Ethernet RJ45 Copper
- Speed: Software selectable 10/100/1000 Ethernet, Auto; Software selectable Half/Full/Auto duplex
- Ethernet Isolation: 1.5Kv Magnetic
- Standards: IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow Control
- Processing Type: Store and Forward
- MAC Address Table Size: 8K
- VLAN ID range: 1 to 4000
- USB-C: 1 x USB 3.2 Type-C with a transfer rate up to 5Gbps (Configurable for Ethernet over USB)
- RS232 Serial: 1 x RS232 DB9 female connector
- Serial Port Speeds: 300bps to 230Kbps with customizable baud rate support
- Data Bits: 5,6,7,8-bit protocol support
- Parity: Odd, Even, Mark, Space, None
- Flow Control: Hardware, Software, Both, None
- Serial Port Protection: 15Kv Electrostatic Discharge Protection (ESD)
- Processing Type - Store and Forward
- One GPIO Input:
Digital Input & Pulse Counting VDC: 0 for ≤ 1V, 1 for ≥ 2.7V
Dry Contact Max Current range: min 0.6mA @ 7V and max 3.5mA @ 36V
Current Sink Output: 0.5A @ 12v - Ignition Sense:
Analog Input: 0.5V to 36V
- Microprocessor: Dual Core ARM 1.2GHz
- RAM: 1GB DDR4
- Flash: 4GB MMC
- LED Indicators:
Power: indicates power status
Serial: indicates serial RS232 connection status and Tx data
WWAN: indicates Wireless Wide Area Network status
GNSS: indicates Global Navigation Systems for GPS, Galileo, Glonas and Beidou status
VPN: indicates VPN presence (for Router Models: IRG5520x & IRG5540x only)
Internet: indicates Internet connectivity - Environmental Specifications:
Operating Temperature: -40°C to 70°C / -40°F to 158°F
Storage Temperature: -40°C to 85°C / -40°F to 185°F
Operating Humidity: 0% to 95% non-condensing
Storage Humidity: 0% to 95% non-condensing
Operating Altitude: 3048 m / 10,000 ft
Cooling: EN 60068-2-1
Dry heat: EN 60068-2-2
Damp: EN 60068-2-30
MTBF: > 287,215 hours (Calculation model based on MIL-HDBK-217-FN2 @ 30°C/86°F)
Heat Output (BTU/HR) - Enclosure: Die Cast Aluminium
- Mounting:
Desktop / Panel / wall-mount
DIN Rail attachement bracket is optional.
(Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175 vertically or horizontally) - Ingress Protection Rating: IP54
- Power/Current Consumption:
Standby (no activity / all ports shutdown): 3.9mA / 46.8mW
Idle Mode (connected/no Activity): 0.23A / 2.70W
Typical Use (connected/with Activity): 0.24A / 2.88W
Note: up to 0.05A / 0.6W more in power savings can be achieved through shutting down the USB port, LEDs, GPS, as well as turning down router processor speed - Power Input: 12/24 VDC Nominal (7 to 36 VDC Range)
- Ignition Sense: VDC voltage variation with On/Off and timer
- External Power Supply (optional): 110 / 220 VAC Power supply with support for EU, US/CND, UK, AUS
- Power Line Protection:
Surge: 8KV (EN61000-4-5 common mode), 2KV (EN61000-4-5 differential and common modes) - Reverse polarity protection: YES
- Vehicle Transient voltage protection: Built-in protection against voltage transient including 5 VDC engine cranking and +200 VDC load dump
- Weight: 0.35kg / 0.77lbs
- Dimensions: 120 x 85 x 34 mm / 4.72 x 3.34 x 1.33 in