Perle - IOLAN SDS16C LDC
Utility Terminal Server - 16x RJ45 serial ports, 24/48 VDC power supply
Listpris:
55 625,20 kr*
Pris för återförsäljare - Inloggning
Leveranstid: För närvarande cirka 3-4 veckor
Tillverkarens artikelnummer:
04032430
Vårt artikelnummer:
220870
Frågor? Vi hjälper dig gärna! → Kontaktformulär
Produktinformation "Perle - IOLAN SDS16C LDC"
Electrical utility engineers and project managers that require a cost effective serial-to-Ethernet solution to help meet NERC-CIP compliance for the protection of critical cyberassets in substations must consider the IOLAN SDS HV/LDC Terminal Server. In addition to the most extensive security features available, these IOLAN’s are designed to meet harsh environments associated with Power Substations with attributes such as support for substation AC and DC voltage ranges, extended operating temperatures and meeting emission, immunity and safety approvals associated with substation IT equipment.
Scope of delivery: Perle Systems - IOLAN SDS16C LDC
Scope of delivery: Perle Systems - IOLAN SDS16C LDC
| Connection: | 10 / 100 / 1000-TX (RJ45) |
|---|---|
| Protocol: | ModBus, RS 232 / 422 / 485 |
| Security: | Enhanced |
| Serial Ports: | 16 Ports |
Features
- 8, 16 and 32 serial ports on RJ45 - software selectable RS232/422/485
- Advanced security features for NERC CIP critical cyberasset substation compliance
- Substation hardened for harsh electrical utility and industrial applications
- Universal high voltage power supply: nominal 125v DC / 250v DC or 115v AC / 230v AC
- Dual Feed low voltage power supply: nominal 24v DC /48v DC
- Dual 10/100/1000 Ethernet with Redundant Path Technology
- Built-in failsafe alarm relay
Technical details
- Processor: MPC8349E, 400 Mhz, 750 MIPS
- RAM MB: 64
- Flash MB: 16
- Number of Serial Ports: 16
- Serial Port Interface: Software selectable RS232 / RS485 / RS422 DTE on RJ45 - RS485: full and half duplex
- Sun/Solaris: Sun/Oracle ‘Solaris' Safe - no "break signal" sent during power cycle causing costly server re-boots or downtime
- Serial Port Speeds: 50bps to 230Kbps with customizable baud rate support
- Data Bits: Configurable for 5,6,7 or 8-bit protocol support, Use TruePort to transparently pass 9-bit serial data
- Parity: Odd, Even, Mark, Space, None
- Flow Control: Hardware, Software, Both, None
- Serial Port Protection: 15Kv Electrostatic Discharge Protection (ESD)
- Local Console Port: RS232 on RJ45 with DB9 adapter (provided)
- Network: Dual 10/100/1000-base TX Ethernet RJ45, Software selectable Ethernet speed 10/100/1000 Auto, Software selectable Half/Full/Auto duplex
- Failsafe Alarm Relay: 3A@24v DC. Normally open contacts closed by IOLAN when active and opened upon alarm condition or power failure
- Dual Power Supply: 2 x Pluggable Terminal Blocks with screw terminals accommodating 28 - 12 AWG wire sizes
- Nominal Input Voltage: 24v DC / 48v DC
- Input Voltage Range: 18 - 72v DC
- Current Consumption @ 18v DC (Amps): 0.55
- Current Consumption @ 24v DC (Amps): 0.4
- Current Consumption @ 48v DC (Amps): 0.25
- Current Consumption @ 72v DC (Amps): 0.18
- Typical Power Consumption (Watts): 13
- Chassis Ground: Grounding screw for a #10 ring terminal
- LEDs: Power, System Ready, Network Link activity, Serial: Transmit and Receive data per port
- Heat Output (BTU/HR): 44.4
- MTBF (Hours): 105,495 (Calculation model based on MIL-HDBK-217-FN2 @ 30 °C)
- Operating Temperature: -40°C ambient for 16 hours and +70°C ambient for 16 hours without use of fans
- Storage Temperature: -40°C to 85°C, -40F to 185F
- Humidity: 5 to 95% (non condensing) for both storage and operation.
- Case: SECC Zinc plated sheet metal (1 mm)
- Ingress Protection Rating: IP30
- Mounting: 1U - 19" rack, front and rear mounting hardware included, DIN Rail mounting kit optional
- Weight: 3.18 kg
- Dimensions: 1U Rack form factor - 26.4 x 43.4 x 4.4 (cm), 10.38 x 17.1 x 1.75 (in)