AKCP - CCM - Contactless Current Meter
Contactless Current Meter
Listpris:
1 488,75 kr*
Pris för återförsäljare - Inloggning
7 stycken tillgängliga, leveranstid: 3 - 5 arbetsdagar
Tillverkarens artikelnummer:
CCM
Vårt artikelnummer:
949017
Frågor? Vi hjälper dig gärna! → Kontaktformulär
-
Beskrivning Monitor Current Without Cutting Wires Typical current transformers require access to a single live wire. The Contactless C… Mer
-
Egenskaper Features No downtime for installation No electrician required Input for PUE calculations Rack level current monitoring Acc… Mer
-
Tekniska detaljer Technical details Status Indication LED indication for power LED array for calibration Inputs Magnetic field sensing of cu… Mer
-
Datablad
Produktinformation "AKCP - CCM - Contactless Current Meter"
Monitor Current Without Cutting Wires
Typical current transformers require access to a single live wire. The Contactless Current Meter (CCM) does not need any splitting of cables, needs no electrician to install and is completely non invasive. With an accuracy of +/-5% (on factory calibrated cable) and +/- 10% on in field calibrated cables, the CCM gives sufficient accuracy to check for sufficient power overhead in your data center for capacity planning. It can also warn when approaching the tripping point of your breakers, and be utilized for PuE calculations.
Suitable for:
Typical current transformers require access to a single live wire. The Contactless Current Meter (CCM) does not need any splitting of cables, needs no electrician to install and is completely non invasive. With an accuracy of +/-5% (on factory calibrated cable) and +/- 10% on in field calibrated cables, the CCM gives sufficient accuracy to check for sufficient power overhead in your data center for capacity planning. It can also warn when approaching the tripping point of your breakers, and be utilized for PuE calculations.
Suitable for:
- SP1+ Basic
- SP1+ Professional
- SP2+ Basic
- SP2+ Professional
- SP2+ Basic LCD
- SP2+ Professional LCD
Features
- No downtime for installation
- No electrician required
- Input for PUE calculations
- Rack level current monitoring
- Accurate +/- 5%
- Input for AKCP sensorCFD
Technical details
Status Indication
LED indication for power
LED array for calibration
Inputs
Magnetic field sensing of current in multicore cable
Accuracy
+/-5% when factory calibrated on cable of same type
+/-10% on non-factory calibrated cable
Components
Manufactured using highly integrated, low power surface mount technology to ensure long term reliability.
Operating Environment
Temperature: Min. -35°C Max. 80°C
Humidity: Min. 20% – Max. 80% (Non-condensing)
Interface
Communications Cable: RJ-45 jack to sensor using UTP Cat 5e cable
Power Source: Powered by the controller unit. No additional power needed
Power Consumption: Typical 7.25mWatt, 1.45mA
Maximum Cable Length: 50ft using standard CAT5/6 UTP cable
Dimensions: 49(W) x 45(H) x 51(D) mm
Mounting: Cable mounted
Sensor Count: 1
Status Indication
LED indication for power
LED array for calibration
Inputs
Magnetic field sensing of current in multicore cable
Accuracy
+/-5% when factory calibrated on cable of same type
+/-10% on non-factory calibrated cable
Components
Manufactured using highly integrated, low power surface mount technology to ensure long term reliability.
Operating Environment
Temperature: Min. -35°C Max. 80°C
Humidity: Min. 20% – Max. 80% (Non-condensing)
Interface
Communications Cable: RJ-45 jack to sensor using UTP Cat 5e cable
Power Source: Powered by the controller unit. No additional power needed
Power Consumption: Typical 7.25mWatt, 1.45mA
Maximum Cable Length: 50ft using standard CAT5/6 UTP cable
Dimensions: 49(W) x 45(H) x 51(D) mm
Mounting: Cable mounted
Sensor Count: 1